+- Portrait Pro Forums (https://forum.portraitprofessional.com)
+-- Forum: PortraitPro software (https://forum.portraitprofessional.com/forumdisplay.php?fid=3)
+--- Forum: Frequently Asked Questions (https://forum.portraitprofessional.com/forumdisplay.php?fid=16)
+---- Forum: Using Portrait Professional (https://forum.portraitprofessional.com/forumdisplay.php?fid=21)
+---- Thread: Face turns red (/showthread.php?tid=2623)
Face turns red - KatjaZ - 08-23-2011
I just started using Portrait Professional Studio 10 after being convinced by what I saw in the trial version first (which does not allow Save). Worked on my first portrait yesterday and everything looked great until Save. When I opened the saved JPEG outside the application, the skin tone had changed to a weird sun-burn blotchy red. Any idea where this comes from? My work flow was: open RAW file in CS5, process as needed, save file as JPEG since PP does not support PS files, process JPEG in PP 10, save.
Thanks
Katja
RE: Face turns red - tebogan - 08-23-2011
katjaZ,
Please post both the original and the saved version so that others can assist you with this situation.
TEBogan
Moderator
(08-23-2011, 07:22 PM)KatjaZ Wrote: I just started using Portrait Professional Studio 10 after being convinced by what I saw in the trial version first (which does not allow Save). Worked on my first portrait yesterday and everything looked great until Save. When I opened the saved JPEG outside the application, the skin tone had changed to a weird sun-burn blotchy red. Any idea where this comes from? My work flow was: open RAW file in CS5, process as needed, save file as JPEG since PP does not support PS files, process JPEG in PP 10, save.
Thanks
Katja
RE: Face turns red - KatjaZ - 08-23-2011
OK, I added it to the post. Thanks!
RE: Face turns red - Slynky - 08-23-2011
I don't have extensive experience with the software myself--never had that happen. And, like you said, not just redder, splotchy or something.
RE: Face turns red - supermimai - 09-12-2012
I have the same experience, when I take a picture of the work inside Portrait Pro then saving to jpeg, the output result in jpeg is "red". I will try to save as a tiff..
my input files are CR2 taken with a Canon 5D Mark II